General requirement: master degree above（PHD preferred), graduated from EE, physics, electrical material science and related field. 6 years work experience in power device design and simulation.
器件开发经验,电子类,物理学或材料学等相关专业硕士或以上学历,博士最佳
Responsibility:
a. Be in charge of device design and development, including trench MOSFET, SGT, Super Junction MOSFET, LDMOS, IGBT, and other devices;
负责器件的设计和开发，包括沟槽MOSFET、SGT、超结MOSFET、LDMOS、IGBT等器件;
b. Work including process simulation, device simulation, layout, device characterization, device reliability and qualification;
工作包括工艺模拟，器件模拟，布置，器件特性，器件可靠性和稳定性
c. Release the device design rule to other team.
将器件设计规则发布给团队
Special requirement:
a. Skilled in TCAD software, such as Silvaco Taurus or Sentaurus;
熟练使用TCAD软件，如Silvaco Taurus或Sentaurus
b. Can draw test pattern layout with layout tools, such as laker, virtuoso;
熟练使用布局工具绘制测试模式布局，如laker, virtuoso
c. Skilled in device characterization instruments, such as B1505, HP4155, HP8753D and HP4284;
熟练掌握B1505、HP4155、HP8753D、HP4284等器件表征仪器
d. Basic knowledge in semiconductor process flow.
具备半导体工艺流程的基本知识
General requirement: master degree above, graduated from EE, electronics and circuit. 8 years work experience in analog and power IC product design
8年以上模拟与功率IC设计经验，电子类硕士以上学历。
Responsibility:
a. work with marketing and FAE to define the analog and power IC product,
与FAE和市场人员一起定义产品并启动项目
b. lead IC designer group to complete the product development on schedule,
代理IC设计工程师按照项目计划开发产品
c. follow and construct the product development procedure;
根据公司产品开发流程进行项目推动
d. support the FAE when need.
支持FAE和市场销售人员
Special requirement:
a. Skilled in circuit simulation tools;
精于电路仿真
b. Know about layout tools, such as laker,
对版图设计有一定了解
c. Have more than 8 years power IC design experience, such as DC/DC, AC/DC, LDO, Gate driver, can define the product topology，
在DC/DC, AC/DC栅驱动以及其他模拟电路设立领域有超过8年实战经验
d. Know well in IC test and demo board verification procedure ，
熟悉IC测试程序和DEMO板验证
e. Knowledge in semiconductor device and process flow, especially power device and technology 。
对基本器件和工艺有所了解，特别是功率器件